Proxim AP-4000 User Manual Page 56
- Page / 235
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Advanced Configuration AP-4000 Series User Guide
Interfaces
56
The Wireless NIC determines the regulatory domain the AP is operating in. If the AP has dual Wireless NICs, the NIC in
Slot A determines the regulatory domain. Depending on the regulatory domain, a default country code is chosen that is
transmitted in the beacon and probe response frames.
Configuring 802.11d Support
Perform the following procedure to enable 802.11d support and select the country code:
1. Click Configure > Interfaces > Operational Mode.
2. Select Enable 802.11d.
3. Select the Country Code from the ISO/IEC 3166-1 CountryCode drop-down menu.
4. Click OK.
5. Configure Transmit Power Control and transmit power level if required.
TX Power Control/Transmit Power Level
Transmit Power Control uses standard 802.11d frames to control transmit power within an infrastructure BSS. This
method of power control is considered to be an interim way of controlling the transmit power of 802.11d enabled clients in
lieu of implementation of 802.11h.
The Transmit Power Control feature lets the user configure the transmit power level of the wireless interface at one of
four levels:
• 100% of the maximum transmit power level defined by the regulatory domain
•50%
•25%
• 12.5%
When Transmit Power Control is enabled, the transmit power level of the card in the AP is set to the configured transmit
power level. The power level is advertised in Beacon and Probe Response frames as the 802.11d maximum transmit
power level.
When an 802.11d-enabled client learns the regulatory domain related information from Beacon and Probe Response
frames, it learns the power level advertised in Beacon and Probe response frames as the maximum transmit power of the
regulatory domain and configures itself to operate with that power level.
As a result, the transmit power level of the BSS is configured to the power level set in the AP (assuming that the BSS has
only 802.11d enabled clients and an 802.11d enabled AP).
Configuring TX Power Control
1. Click Configure > Interfaces > Operational Mode.
2. Select Enable Transmit Power Control.
3. Select the transmit power level for wireless interface A or B from the Wireless-A or Wireless-B: Transmit Power Level
drop-down menu.
4. Click OK.
- User Guide 1
- Copyright 2
- Trademarks 2
- OpenSSL License Note 2
- Contents 3
- Introduction 9
- Mesh Network Convergence 11
- Mesh Network Configuration 13
- Guidelines for Roaming 14
- IEEE 802.11 Specifications 15
- SNMP Management 16
- SSH (Secure Shell) Management 17
- Overview 18
- Antennas 19
- Active Ethernet 20
- LED Indicators 21
- Prerequisites 22
- Mesh Prerequisites 23
- Product Package 24
- System Requirements 24
- Hardware Installation 25
- Installing the Security Cover 26
- Installing External Antennas 28
- Installing the AP in a Plenum 29
- Initialization 31
- Logging In 33
- Using the Setup Wizard 35
- Installing the Software 37
- Related Topics 40
- System Status 41
- Advanced Configuration 42
- Dynamic DNS Support 44
- IP Configuration 46
- DHCP Server 47
- DHCP Relay Agent 49
- Link Integrity 50
- Ethernet 64
- Mesh (AP-4000M/AP-4900M Only) 66
- Management 68
- IP Access Table 69
- Services 69
- Filtering 80
- Advanced 83
- TCP/UDP Port 83
- Rogue Scan 93
- Spanning Tree 97
- Storm Threshold 98
- Intra BSS 99
- Packet Forwarding 99
- Priority Mapping 102
- Radius Profiles 106
- Configuring Radius Profiles 107
- RADIUS Accounting 110
- SSID/VLAN/Security 113
- Management VLAN 115
- Security Profile 116
- MAC Access 123
- Wireless-A or Wireless-B 123
- Monitoring 129
- IP/ARP Table 131
- Learn Table 132
- Interfaces 134
- Station Statistics 137
- Mesh Statistics 138
- Commands 139
- TFTP File Transfer Guidelines 140
- HTTP File Transfer Guidelines 140
- Update AP 141
- Update AP via HTTP 142
- Retrieve File 143
- Retrieve File via HTTP 144
- Help Link 147
- Troubleshooting 148
- Client Connection Problems 150
- VLAN Operation Issues 151
- Active Ethernet (AE) 151
- Recovery Procedures 152
- Related Applications 156
- TFTP Server 157
- Command Line Interface (CLI) 158
- Navigation and Special Keys 159
- CLI Error Messages 159
- Bootloader CLI 160
- CLI Command Types 161
- Parameter Control Commands 165
- Using Tables and Strings 169
- Log into the AP using Telnet 170
- Other Network Settings 175
- (Mbits/sec)> 177
- CLI Monitoring Parameters 184
- Parameter Tables 184
- System Parameters 187
- Network Parameters 188
- Interface Parameters 191
- Management Parameters 197
- Filtering Parameters 202
- Alarms Parameters 204
- Bridge Parameters 206
- RADIUS Parameters 208
- Security Parameters 209
- VLAN/SSID Parameters 211
- Other Parameters 211
- CLI Batch File 214
- Reboot Behavior 215
- ASCII Character Chart 216
- Specifications 217
- Advanced Bridging Functions 218
- Security Functions 218
- Network Functions 219
- Hardware Specifications 220
- Available Channels 221
- AP-4900M Channels 222
- Technical Support 224
- Telephone Support 225
- Statement of Warranty 226
- Other Information 227
- Regulatory Compliance 228
- Warnings 232
- Modifications 232
Related products and manuals for WLAN access points Proxim AP-4000
(250 pages)NGS NGS-MOUSE-0933 manuals
Owner’s manuals and user’s guides for Mice NGS NGS-MOUSE-0933.
We providing 1 pdf manuals NGS NGS-MOUSE-0933 for download free by document types: Datasheet
Comments to this Manuals