Proxim ORiNOCO AP-700 User Manual Page 29
- Page / 221
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Installation and Initialization AP-700 User Guide
Initialization
29
— 802.11g-wifi: 802.11g-wifi has been defined for Wi-Fi testing purporses. It is not recommended for use in your
wireless network environment.
NOTE: In countries in which 802.11a (5 GHz) is not available for use, the AirSPEED AP541 provides
dual-band (802.11b and 802.11g) support only. 802.11a functionality covered in this User Guide is not
supported.
In general, you should use either 802.11g only mode (if you want to support 802.11g devices only) or 802.11b/g
mode to support a mix of 802.11b and 802.11g devices.
• Configure the following available options and click Save & Next:
— Primary Network Name (SSID): Enter a Network Name (between 1 and 32 characters long) for the wireless
network. You must configure each wireless client to use this name as well. Note that the AP-700 supports up
to 16 SSIDs and VLANs. Please see the Advanced Configuration chapter for information on the detailed rules
on configuring multiple SSIDs, VLANs, and security profiles.
NOTE: Do not use quotation marks (single or double) in the Network Name; this will cause the AP to
misinterpret the name.
— Auto Channel Select: By default, the AP scans the area for other Access Points and selects the best
available communication channel, either a free channel (if available) or the channel with the least amount of
interference. Remove the check mark to disable this option. See Dynamic Frequency Selection/Radar
Detection (DFS/RD) for information and Available Channels for a list of available channels.
— Frequency Channel: When Auto Channel Select is enabled, this field is read-only and displays the Access
Point’s current operating channel. When Auto Channel Select is disabled, you can specify the Access Point’s
channel. If you decide to manually set the unit’s channel, ensure that nearby devices do not use the same
frequency. Available Channels vary based on regulatory domain. See Dynamic Frequency Selection/Radar
Detection (DFS/RD) for details more information and Available Channels for a list of available channels.
— Transmit Rate: Use the drop-down menu to select a specific transmit rate for the AP-700 radio. The Auto
Fallback feature allows the AP to select the best transmit rate based on the cell size.
— For 802.11a only mode, choose between 6, 9, 12, 18, 24, 36, 48, 54 Mbits/s, and Auto Fallback.
— For 802.11b only mode, choose between 1, 2, 5.5, 11 Mbits/s, and Auto Fallback.
— For 802.11g only mode, choose between 6, 9, 12, 18, 24, 36, 48, 54 Mbits/s, and Auto Fallback.
— For 802.11/jointfilesconvert/4552/bg mode, choose between 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbits/sec, and Auto
Fallback.
— For 802.11g-wifi mode, choose between 6, 9, 12, 18, 24, 36, 48, 54 Mbits/s, and Auto Fallback.
NOTE: 802.11g-wifi has been defined for Wi-Fi testing purposes. It is not recommended for use in your
wireless network environment.
Additional advanced settings are available in the Wireless Interface Configuration screen.See Interfaces for details.
See Security Profile for a description of security features, Management VLAN for a description of VLAN capabilities,
and Configuring Security Profiles for detailed configuration procedures.
6. Review the configuration summary. If you want to make any additional changes, use the navigation panel on the
left-hand side of the screen to return to an earlier screen. After making a change, click Save & Next to save the
change and proceed to the next screen.
7. When finished, click Reboot on the Summary screen to restart the AP and apply your changes.
Installing the Software
Proxim periodically releases updated software for the AP on its Web site, http://support.proxim.com (Knowledgebase
Answer ID 1686). Proxim recommends that you check the Web site for the latest updates after you have installed and
initialized the unit.
- ORiNOCO AP-700 Access Point 1
- User Guide 1
- Copyright 2
- Trademarks 2
- OpenSSL License Note 2
- Contents 3
- AP-700 User Guide 8
- Introduction 9
- Guidelines for Roaming 10
- IEEE 802.11 Specifications 10
- Command Line Interface 11
- HTTP/HTTPS Interface 11
- SNMP Management 12
- SSH (Secure Shell) Management 12
- AP-700 Hardware Description 14
- Antennas 15
- Active Ethernet 16
- LED Indicators 16
- Prerequisites 17
- Product Package 19
- System Requirements 19
- Hardware Installation 20
- Installing the Security Cover 21
- Mounting the AP-700 21
- Installing External Antennas 22
- Installing the AP in a Plenum 23
- Initialization 24
- Logging In 26
- Using the Setup Wizard 27
- Installing the Software 29
- Related Topics 32
- System Status 33
- Advanced Configuration 34
- Dynamic DNS Support 36
- IP Configuration 38
- DHCP Server 39
- DHCP Relay Agent 41
- Link Integrity 42
- Wireless (802.11a/b/g Radio) 49
- Ethernet 56
- Management 58
- IP Access Table 59
- Services 59
- Filtering 70
- Advanced 73
- TCP/UDP Port 73
- Rogue Scan 83
- Figure 4-26 Rogue Scan Screen 86
- Spanning Tree 87
- Storm Threshold 88
- Intra BSS 89
- Packet Forwarding 89
- Priority Mapping 92
- Radius Profiles 96
- Configuring Radius Profiles 97
- RADIUS Accounting 100
- SSID/VLAN/Security 103
- Management VLAN 105
- Security Profile 106
- MAC Access 113
- Wireless 113
- Monitoring 119
- IP/ARP Table 121
- Learn Table 122
- Interfaces 124
- Station Statistics 127
- Commands 129
- TFTP File Transfer Guidelines 130
- HTTP File Transfer Guidelines 130
- Update AP 131
- Update AP via HTTP 132
- Retrieve File 133
- Retrieve File via HTTP 134
- Help Link 137
- Troubleshooting 138
- Client Connection Problems 140
- VLAN Operation Issues 141
- Active Ethernet (AE) 141
- Recovery Procedures 142
- Related Applications 146
- Command Line Interface (CLI) 148
- Navigation and Special Keys 149
- CLI Error Messages 149
- Bootloader CLI 150
- CLI Command Types 151
- Parameter Control Commands 155
- Using Tables and Strings 159
- Log into the AP using Telnet 160
- Other Network Settings 164
- (Mbits/sec)> 167
- CLI Monitoring Parameters 173
- Parameter Tables 174
- System Parameters 176
- Network Parameters 177
- Interface Parameters 180
- Management Parameters 185
- Filtering Parameters 190
- Alarms Parameters 192
- Bridge Parameters 194
- RADIUS Parameters 196
- Security Parameters 197
- VLAN/SSID Parameters 198
- Security Profile Table 198
- Other Parameters 199
- CLI Batch File 201
- Reboot Behavior 202
- ASCII Character Chart 204
- Specifications 205
- Advanced Bridging Functions 206
- Security Functions 206
- Network Functions 207
- Hardware Specifications 208
- Available Channels 209
- RF Performance 210
- Technical Support 211
- Telephone Support 212
- Statement of Warranty 213
- Other Information 214
- Regulatory Compliance 215
- Warnings 218
- Modifications 218
- Industry Canada (IC) 219
- European Union 220
Related products and manuals for Networking Proxim ORiNOCO AP-700
Networking Proxim MP.11 User Manual
(24 pages)
(24 pages)
Networking Proxim ORiNOCO User's Guide
(145 pages)
(145 pages)
Networking Proxim ORiNOCO Installation Guide
(35 pages)
(35 pages)
Networking Proxim ORiNOCO AP-8000 User's Guide
(169 pages)
(169 pages)
Networking Proxim RangeLAN2 7921 User's Guide
(103 pages)
(103 pages)
Networking Proxim ORiNOCO AP-2500 User's Guide
(251 pages)
(251 pages)
Networking Proxim AP-2000 User's Guide
(244 pages)
(244 pages)
Networking Proxim RangeLAN2 7500 User Manual
(141 pages)
(141 pages)
Networking Proxim 7910 User's Guide
(127 pages)
(127 pages)
(9 pages)© 2020, manymanuals.com. All rights reserved. | 0.321 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals