Proxim AP-700 User's Guide Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 231
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
Installation and Initialization AP-700 User Guide
Hardware Installation
23
2. There are two antenna connectors in the AP-700, labeled 1 and 2. Connect the antenna cable to connector 1 (the
connector closer to the LED panel in the compartment).
Figure 2-5 AP-700 Antenna Connectors
3. If installing a second external antenna (not recommended), connect the antenna cable to connector 2.
4. Close the external antenna access compartment.
5. If desired, manually select which antenna(s) to use through the Command Line Interface. See Configure Antenna
Diversity.
Adjusting Tx Output Power
Use the following formula in combination with the table of EIRP limits in US and EU countries to calculate system transmit
power (based on EIRP limits) of these countries:
Tx Power (dBm) = EIRP Limit (dBm) + FL (dB) – G (dB)
where:
Tx Power = Output power measured at the antenna input
EIRP Limit = EIRP limits specified below
FL = Feeder loss including loss of connectors
G = Antenna Gain
* Not certified for FCC regulatory domain.
Band EIRP Limit (dBm)
USA EU
2.4 - 2.4835 GHz (Point-to-Multipoint 36 20
2.4 - 2.4835 GHz (Point-to-Point) When G < 6: 36
When G 6, use the following
equation:
36 -
20
5.15 - 5.25 GHz 23 23
5.25 - 5.35 GHz 30 23
5.47 - 5.725 GHz NA* 30
5.725 - 5.850 GHz (Point-to-Multipoint) 36 14
5.725 - 5.850 GHz (Point-to-Point) No limit 14
G6
3
--------------
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 230 231

Comments to this Manuals

No comments