Proxim ORiNOCO User's Guide Page 65

  • Download
  • Add to my manuals
  • Print
  • Page
    / 145
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 64
Using Web Interface to Manage the Access Point AP-800 User Guide
Configuring the Device
65
RADIUS
A RADIUS server profile consists of a Primary and a Secondary RADIUS server that get assigned to act either as MAC
Authentication servers, 802.1x/EAP Authentication servers, or Accounting Servers in the VLAN configuration.
NOTE: You can configure only single RADIUS profile containing four server profiles viz. primary authentication server,
secondary authentication server, accounting server and secondary accounting server. The profile name is
common for all the four entries.
This page configures only the Primary RADIUS server associated with the profile.
1. Navigate to Configuration > Security > RADIUS.
2. Configure the folllowing parameters for the RADIUS Server profile:
Figure 6-15
Profile Name: Enter the profile name. This profile name is mapped to a VAP.
Max ReTransmissions: Enter the Retransmission value.
Message Response Time: Enter the Message Response time.
ReAuthentication Period: Enter the ReAuthentication Period.
Entry Status: Select the entry status for the profile.
Configure the following parameters for the radius servers:
Server Type: This is read only parameter and it displays the server type.
IP Address: Enter the server’s IP address.
Server Port: Enter the port number which the AP and the server will use to communicate. By default, RADIUS
Authentication/Accounting servers communicate on ports 1812/1813.
Shared Secret: Enter the password shared by the RADIUS server and the AP. The default password is “public.”
Status: Select Enable from the drop-down box to enable RADIUS server, if required.
3. Click OK.
Page view 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 144 145

Comments to this Manuals

No comments