Proxim ORiNOCO User's Guide download pdf (Page 100)

Using SNMP Interface to Manage the Access Point AP-800 User Guide

Configuring the MIB Objects

100

Configuring the MIB Objects

To Configure the Scalar Objects :

1. Select the object, right-click and click Set. This will display the existing value that is configured.

2. If you want to make modifications for the existing value, double-click the object.

3. This displays the list of values that can be used for configuration, select the required vlue and click Ok.

4. Click Execute, this will store the changes in the temporary buffer. Proceed to to SysMgmtCfgCommit table to Commit

the changes.

To Configure the Tabular Objects:

1. Slect the object, right-click and click Get Table. This displays the Table List.

2. From the menu, click Set and drag the table entry for which you want to make the changes to the Set window.

NOTE: You can configure table by configuring each entry that is available for the table or update the entire table as a

single entry.

3. Select the table, right-click, and click Set.

4. In the Set window, to add a row for a table, enter “0” and this will automatically create a row for a particular table.

5. Add the required parameters and configure those parameters.

6. Click Execute and proceed to SysMgmtCfgCommit table to Commit the changes.

To apply the changes to the flash memory:

1. Navigate to deviceMgmt > SysMgmtCfgCommit, right-click and click Set.

2. Set the value as 1 and click OK.

3. Click Execute, this would configure the new value to the flash memory.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 144 145

No comments

Proxim ORiNOCO User's Guide Page 100